Description
Eleaf iJust 2 Starter Kit with 5.5ml Atomizer – 2600mAh
Product introduction
Eleaf iJust 2 Starter Kit is an updated e-cigarette launched by Eleaf. It features the 2600mAh large power capacity despite its exquisite appearance and light weight. The 5.5ml huge e-liquid capacity makes this product more user-friendly. Buy it at HG with best price!
Parameter :
Atomizer
Material: Stainless Steel
Length: 67.5mm
Diameter: 22mm
Capacity: 5.5ml
Resistance: 0.3ohm
Wattage: 30W – 80W
Color: Silver
Thread Type: 510 Thread
Cotton: Organic Cotton
Battery
Length: 81mm
Diameter: 22mm
Capacity: 2600mAh
Battery cell type: 20600
Output Voltage: 3.3 – 4.8V
Output Wattage: 10 – 50W
Color: Silver
Thread Type: 510 Thread
Connector: Spring
It comes with
- 1 x iJust 2 Mouthpiece
- 1 x iJust 2 Atomizer Tube
- 1 x 0.3ohm EC Head (Pre-installed)
- 1 x iJust 2 Atomizer Standard Base
- 1 x iJust 2 Battery
- 1 x iJust 2 USB Cable
- 1 x iJust 2 Airflow Control Ring
- 1 x iJust 2 User Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. 5.5ml Huge Atomizer Capacity
2. 2600mAh Power Supply
3. EC Dual Coil Head
4. Airflow Control
5. Unique Heat Dissipation Design
6. Spring Connector
7. Battery capacity indication:
Below 3.3V: the light will flash 40 times and turn off;
3.3V – 3.55V: the light will flash 4 times very quickly;
3.55V – 3.65V: the light will flash 4 times, 1 time per second;
3.65V – 3.80V: the light will flash 4 times, 1 time per 3 seconds;
Over 3.80V: the light will be on for 5 seconds (just 1 time).
- You can also buy the replacement Eleaf EC Atomizer Head in our store.
How to Use
1. Assembly the atomizer first by connecting the mouthpiece, atomizer tube, atomizer head and atomizer base.
2. Thread atomizer to the battery tightly.
3. Power On/Off: Press the button 5 times in quick succession within 2 seconds. The white indicator light will flash 5 times to show iJust 2 is ready for use. By doing the same, turn off the device.
4. Long press the button to take a puff.
5. Charging: Charge iJust 2 by connecting it with wall adapter or computer via USB cable. The indicator light will be red when taking a charge. Once fully charged, indicator light will go out.
Note: It will take three hours to get a full charge via 1A wall adapter.
Protection
Atomizer Protection: When vaping time exceeds 10 seconds, iJust 2 battery will shut off automatically with white indicator light flashing 10 times.
Short-circuit Protection: When the resistance is less than 0.15ohm, short-circuit occurs with the white indicator light flashing 3 times.
Low-voltage Protection: When the voltage of battery is below 3.3V, the white indicator light will flash 40 times. At the same time, pressing power button cannot turn on.
Unlock the Low-voltage Protection: Charge the battery till voltage is above 3.7V. Then the low-voltage protection will be unlocked automatically.
How to Fill
1. Screw the base off the atomizer.
2. Use the syringe or dropper to fill less than 5.5ml e-liquid. Do not overfill it.
3. Screw the base back on to the atomizer again.
- Attention: there is a CE mark at the bottom of the battery.
- 510 Threaded
Please check Guarantee Policy.
Guarantee period: 3 months for the battery.
Our images are copyrighted. It is forbidden to reprint without our permission.