Bilstar evod basic starter kits utilize the most advance technology. 2-module design includes an approx 650-puff tank atomizer. Everytime you replace the new atomizer head coil, a brand new embedded atomizer ensure perfect and pure vapor.
* Battery Capacity: 650mAh, 900mAh, 1100mAh
* Charging time: 2-3 hours
* Puffs to tank atomizer: 650 puffs approxly (depending on the vital capacity of each person)
* Ego/510 thread
* Color: Black, Silver, Blue, Red, Purple, Yellow, Pink, Green, White
* Resistence: 1.5Ω-3.0Ω
* Low Voltage Protection
* Short Circuit Protection
* Overcharge and Overdischarge Protection
* Battery Switch 5-click on/off button Protection
Each Kit includes:
* 1x eVod Battery
* 1x MT3 atomizer (NO Liquid)
* 1x USB Charger
How to use:
1. Unscrew the Base from the Bilstar MT3 Atomizer and filling the Bilstar MT3 atomizer
After you take the atomizer from the box, you will need to remove the base from the tank. This is a very important step in the process: you will need to fill your tank with ejuice. Start by tilting your tank to the side as to not get any ejuice in the exposed air hole. The open and exposed air hole is where you will inhale ejuice from. If you fail to fill the MT3 atomizer tank around the air hole and ejuice pours into the air hole, you may get a gurgling tank, ejuice in your mouth or even worse a clogged tank. If this happens, you will need to pull apart the tank and clean it. 2. Tilt your Tank Upside-Down and Screw the Base back on the Tank After you have carefully filled your Bilstar MT3 atomizer with ejuice, replace the atomizer base back onto the tank. In this step, you want to keep your tank perfectly vertical as to not spill any ejuice when screwing on the base and atomizer unit. After you have dropped your atomizer and base unit back onto the tank, tightly screw on the base and wipe off any ejuice residue. 3. Flip the Tank Right-Side Up and let Ejuice Soak in Coil Flip your Bilstar MT3 atomizer right-side up and let remaining ejuice in tank soak into the coil (this is only necessary for new and replacement BCC Coils). Again, wipe away any addition ejuice leakage or residue. 4. Screw on Tank back onto the Battery Housing Attach the entire Bilstar MT3 atomizer unit back onto the battery housing. Don’t get anxious and start firing your coil unless you have completely soaked your coil for at least 1-2 minuets. Failing to let your ejuice soak into the coil will result into a burnt taste and no vaper wants a burnt taste. 5. Turning on the Bilstar Evod Battery Turn on your battery by rapidly pressing the button five (5) times fast and turn off your battery by rapidly pressing the button five (5) times. This is same way of turning on just about every other vape pen in the market. Very similar to the classic eGo-T, eGo-Twist and VV Passthrough. When you are vaping, please be sure the button is keeping pressed. . 6. Charging the Bilstar Evod Battery with Provided USB Charger This is a simple step in the process of getting to know your Bilstar Evod Basic Starter Kit, which is similar as other version vape pen charger. If your Bilstar Evod battery has no power, please screw the usb charger on it, and connect the usb charger with your home wall plug.
Important Notice: The switch button has two types (common round, thumb round). Both are authentic versions made by Bilstar. The physical product colors may be different from the photograph online due to camera shooting.
1. Free Shipping is available for shipping to most of the countries, and it will take approxly 15 – 60 days to arrive at your place. If you can not wait, please select the faster shipping method with more shipping cost. This shipping methods has been described before you select the shipping method.
2. Please trace the tracking number through . If the tracking information is updated slowly, please don’t worry. The transit time may be longer due to transport peak season, holidays and festivals, normal customs clearance.