Description
KangerTech Subvod:
Introducing the new Kangertech tech Subvod, a very sufficient and easy to use starter kit By Kangertech, a company that seems to just make people happy. Here at Cartly, our best selling kits are made by KangerTech and they never seem to disappoint. Let’s breakdown the specifications of this beautiful Kangertech Subvod starter kit.
Simple Package:
You don’t need a science degree to use the new Kangertech Subvod, Kangertech has taken the best features from all their mods and put it into this cool and efficient starter kit. It comes with a built-in 1300MAH which means it will serve you all day. The KangerTech Subvod also comes with a top tank nano top-fill tank that uses subOHM coils with a battery specifically tuned for those subOHM coils.
What You Get:
Toptank Nano x1
Subvod battery x1
User guide
authentication card
SSOCC 0.5 SUB Ohm
Spare Pyrex glass
Micro USB cable
TOPTANK Specs:
Diameter: 18.5 mm
Length: 44mm (excluding tip and 510 thread)
Weight: 40g (excluding tip)
Capacity: Top filling 3.2ML US, 1.9ML EUR
Sliding airflow
Strengthened pyrex glass
Replaceable tips
The Kangertech Subvod Battery:
Length: 90mm
Diameter: 18.5mm
Weight: 57g
Output voltage: 3.7V
Capacity: 1300 mAH
Coil resistance: Above > 0.4 Ohm
Charging: Micro USB 5V / 500mA
Tanks connection: 510 thread
Spec: short circuit – over charge and over use protection
Instructions:
Filling E-juice:
There are 2 ways you can fill the TOPTANK Nano, bottom filling and top filling. For bottom filling Follow the procedure of changing the SOCC Before screwing back the airflow base, fill the tank, make sure the juice is below the middle stern and ensure no juice spills into it.
How To Prime Your Kangertech Subvod:
Unscrew the KangerTech Subvod Nano tank, install the new 0.5-ohm coil, hold the tip after you’ve screwed in the coil and drop a few drops of juice on the coil where cotton is visible until the cotton has turned a little brown. Screw the pyrex tank back in (go slowly as the pyrex tank is sensitive). Make sure the airflow (bottom of the tank) section is open and screw the tank back on to the mod slowly until it’s tightened. To fill the tank unscrew the tip, and fill it with your favorite juice, make sure you fill until you the metal rim. make sure you clean up access juice. Take a few hits of the vape before pressing the fire button to make sure the juice flow is correct. Press the fire button 5 times quickly and start by taking your first hits gently to make sure everything is set up correctly and the airflow is sufficient. Increase the length of the hit as you go, and wipe excess juice as you go. This is normal as the coil is still new and not absorbing all the juice. Take a few more hits and there you have primed your Kangertech Subvod and you’re ready to start vaping.
Battery Function:
Click the button 5 times in a fast manner to switch on or off the batter, when the battery is on press the button to vape. When the atomizer’s resistance is less than 0.4 Ohm and you press the button it will not work and the button will flash. When the battery capacity is draining out, press the button, it will flash over ten times when it does so you know you need to recharge the battery. You could activate the overuse protection by pressing down the button for 10 seconds, doing this will stop output and you’ll see a button flashing. When charging by micro USB cable the bottom LED will flash red, once it is full it will turn green.
In Conclusion:
The Kangertech Subvod is super easy to use and perfect for beginners, use it with your favorite juice. Keep in mind that the Kangertech Subvod is a full subOHM setup which is kind of like the iJust 2 that was a favorite. It has the 0.5-ohm coil (stainless steel) organic cotton. It gives amazing thick vapor and the tanks from Kangertech usually give the best flavor output. Give this perfect starter kit a try, keep your battery power up to always get the best output of vape and enjoy!
Kangertech SUBVOD-C Starter Kit 1300mAh
Product introduction
Kanger Subvod C Kit includes a build-in 1300mAh SUBVOD battery and a 2.8ml Subtank Nano-C tank. The Subtank Nano-C has many great features,leak resistant cup tank, top filling design and adjustable e-liquid channel and symmetric airflow slots. With attractive price, the Subvod C is a perfect option for starter users. 5 colors for your selection.
Parameters:
SubtanK Nano-C
Size: 18.5mm (D) x 57mm (L)
Capacity: 2.8ml
Thread: 510
SUBVOD Battery
Length: 90mm
Diameter: 18.5mm
Capacity: 1300mAh
Output Voltage: 3.7V
Coil Resistance: Over 0.4ohm
Charging: Micro USB
Thread: 510
Features
- Top Filling
- Leak resistant glass tank – cup design
- Adjustable e-Liquid channel
- Symmetric airflow slots
- Simple One Button Design
- Short Circuit Protection
- Low Resistance Protection
- Overcharge Protection
It comes with
- 1 x SUBVOD Battery – 1300mAh
- 1 x Subtank Nano-C Tank -2.8ml
- 1 x SSOCC SS 0.5ohm Atomizer Head
- 1 x Micro USB Cable
- 1 x Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice
Order Tips
- SUBVOD can work with 510 threaded clearomizers/tanks.
- The Subtank Nano-C is only compatible with Kanger SSOCC heads. SUBVOD battery doesn’t support TEMP control.