Electronic Cigarette aspire Dynamo Vape Kit 220W High Power Device Support VW VV Bypass CPS TC TCR Modes with 2 inch TFT Screen
Aspire now brings you yet another kit with awesome flexibility and lots of power. Introducing the new Aspire 220 watt Dynamo kit. It allows for use with three different battery types, 18650, 20700 or 21700. The Dynamo can also be used in various modes, allowing you to easily select between Wattage, Voltage, Bypass, CPS (C1/C2/C3), TC(Ni/Ti/SS316L) and TCR(M1/M2/M3). It comes in five super colors Dark Grey, Red with Black, Rainbow, Purple, and Camo with Black, all have the new Nepho tank in complimentary colors.
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 220 watts regardless of which type of battery is used, 18650, 20700 or 21700.
1x Dynamo mod(without battery)
1x Nepho Tank
1x Glass tube
2x Coils (0.5Ω and 0.15Ω Mesh Coil)
1x USB Cable
1x Warning card
1x User manual
1x Warranty card
1x Dual 18650 battery adapter
The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspires all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.
Nepho coil Installation
Coil installation couldn’t be easier, simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press fit so are much less messy to handle when replacing.
Battery Installation(not include battery)
Please noted:This mod has protective film on the sceen,you need to remove it.
Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.
Mod screen, settings, and modes
Press fire button to enter. When you are in “Time Set”press fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod, we’ve created 11 different types of Watch UI to expand your choices.
The Dynamo kit comes with all the safety features that Aspire is famous for.
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging the screen will shut off.
The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging, please unplug the charging cable before changing the batteries.
ASPIRE NEW VERIFICATION SYSTEM
In the interests of ensuring the quality of our products and to protect the rights of our customers, Aspire has introduced an new and improved 3 step product verification system. It consists of a new 3D hologram sicker displaying the word GENUINE in different sizes depending on the way it is viewed, a QR code that takes the customer directly to our website for the purposes of checking the third stage, the scratch off panel that reveals the verification code to be used in the verification process.
This new sticker will be placed on all new products released in future. We will of course still have existing products in the market that carry our current verification stickers, these are still valid and will still be able to be checked on our website as usual. We encourage all our customers to scan the QR codes to visit the website as they become available on our new products, and to continue to use the existing stickers to verify authenticity of their purchase. It’s important that customers use both the old stickers and the new QR code based stickers as they become available as our after sales policy is only valid on genuine original Aspire products. We therefore urge our customers only to buy only from an authorized Aspire source.
1.Secure payment method
We support the following payment methods(Visa/MasterCard/QIWI/WebMoney/Paypal/CrediCard) and so on)
2.We support cancelling before shipment.
If you changed your mind and don’t want this order,you can cancel it with the reason”I don’t want this order”
3.Fast deliver and Traceable shipping method.
Normally we send the package within 2 working days and we use Registered Post Airmail.Normally it will arrive in 15-45 days.
If you didn’t receive the package after 60 days,we can full refund.
If you ordered wrong item or you don’t want the product once received(within 7days after you received),you can return to us before using(please don’t destroy the packaging)and make sure the goods will return to us in good condition.Once we received the package and checked no problems,we will refund.
We have 3 months guarantee for kit and mod.If there is any quality issues,please send message of following infortion:1.Order number 2.The photo of the product batch code,bar-cede and security code on the package.3.Clear photo or video which can show the problem clearly.
Please kindly don’t open the dispute against us at first,we are always willing to solve the problems friendly and efficiently.
1.About BatteryBecause battery cannot ship so normally our kits don’t include 18650 battery,you need to buy battery in your local market.But some kits have built-in battery. 2.About DeliveryNorwally we have Singapore Post,e-Packet and DHL for your option.Post is free shipping but need around 15-35 days can arrive.In boom season some package may be delay in transporting,in that case you can ask us to extend the Buyer Protection Time. 3.About DeclareTo make sure customers can receive the goods smoothly,normally we declare about Phone Case/Accessories(not mention e cigs) for anount USD 5-20,if you have special requests please leave us message.
How to avoid leaking
1.Keep the atomizer upright, do not lay down it sideway.When charging,please remove the atomizer and keep it upright.2.Please turn off the airflow hole when refilling,don’t refill the liquid to the coil core space.3.Check the seal of the atomizer,to make sure the seal is in good condition.And check the all parts make sure they are tightened.4.Please wait for 5 minutes after refill the liquid,or the coil will burn.Once the coil burned,may cause leaking.5.Please check the glass tube,even very small crack can cause leaking.6.Don’t open the top cap for long time,due to air pressure reasons, may cause leaking.7.Before you vape,please check if the atomization core is tightened with the atomizer base.If they are not tightened,the liquid may leak from the airflow holes.8.Please noted that the few condensate around the airflow holes is normal,just need to clean it and not affect normal use.
Maintenance of atomization core
1.Atomizer core is easy consumables,normally we suggest you to change the coil every one or two weeks.If you use the coil for too long will cause the liquid to flow out of the base.2.After you refill the liquid, do not vape at once,the coil may burn.Please keep the Atomizer upright for 5 minutes and then you can vape.3.When you refilling the liquid,please keep in mind don’t refill the liquid to the coil core space,if you refilled please clean it at once,otherwise you may suck the liquid into your mouth or the liquid will leak out.4.Please refill the liquid if the liquid is less than 10%, or the remaining smoke will flow down with the crest of the atomizing head and the bottom of the mouthpiece.5.Please keep in mind:the Atomizer Core cannot be cleaned by water.6.If the Mod shows Atmizer Low and cannot vape, please check if there is liquid between the Atomizer core and Atomizer Base,please clean the liquid carefully and then try again.